Added the launcher and files.

dosbox.conf

@@ -0,0 +1,196 @@
+# This is the configurationfile for DOSBox 0.72.
+# Lines starting with a # are commentlines.
+# They are used to (briefly) document the effect of each option.
+
+[sdl]
+# fullscreen -- Start dosbox directly in fullscreen.
+# fulldouble -- Use double buffering in fullscreen.
+# fullresolution -- What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).
+# windowresolution -- Scale the window to this size IF the output device supports hardware scaling.
+# output -- What to use for output: surface,overlay,opengl,openglnb,ddraw.
+# autolock -- Mouse will automatically lock, if you click on the screen.
+# sensitiviy -- Mouse sensitivity.
+# waitonerror -- Wait before closing the console if dosbox has an error.
+# priority -- Priority levels for dosbox: lowest,lower,normal,higher,highest,pause (when not focussed).
+#             Second entry behind the comma is for when dosbox is not focused/minimized.
+# mapperfile -- File used to load/save the key/event mappings from.
+# usescancodes -- Avoid usage of symkeys, might not work on all operating systems.
+
+fullscreen=false
+fulldouble=true
+fullresolution=original
+windowresolution=original
+output=surface
+autolock=true
+sensitivity=100
+waitonerror=true
+priority=higher,pause
+mapperfile=mapper.txt
+usescancodes=false
+
+[dosbox]
+# language -- Select another language file.
+# memsize -- Amount of memory DOSBox has in megabytes.
+# machine -- The type of machine tries to emulate:hercules,cga,tandy,pcjr,vga.
+# captures -- Directory where things like wave,midi,screenshot get captured.
+
+language=
+machine=vga
+captures=capture
+memsize=16
+
+[render]
+# frameskip -- How many frames DOSBox skips before drawing one.
+# aspect -- Do aspect correction, if your output method doesn't support scaling this can slow things down!.
+# scaler -- Scaler used to enlarge/enhance low resolution modes.
+#           Supported are none,normal2x,normal3x,advmame2x,advmame3x,hq2x,hq3x,
+#                         2xsai,super2xsai,supereagle,advinterp2x,advinterp3x,
+#                         tv2x,tv3x,rgb2x,rgb3x,scan2x,scan3x.
+#           If forced is appended (like scaler=hq2x forced), the scaler will be used
+#           even if the result might not be desired.
+
+frameskip=0
+aspect=true
+scaler=hq3x
+
+[cpu]
+# core -- CPU Core used in emulation: normal,simple,dynamic,auto.
+#         auto switches from normal to dynamic if appropriate.
+# cycles -- Amount of instructions DOSBox tries to emulate each millisecond.
+#           Setting this value too high results in sound dropouts and lags.
+#           You can also let DOSBox guess the correct value by setting it to max.
+#           The default setting (auto) switches to max if appropriate.
+# cycleup   -- Amount of cycles to increase/decrease with keycombo.
+# cycledown    Setting it lower than 100 will be a percentage.
+
+core=auto
+cycles=9000
+cycleup=500
+cycledown=20
+
+[mixer]
+# nosound -- Enable silent mode, sound is still emulated though.
+# rate -- Mixer sample rate, setting any devices higher than this will
+#         probably lower their sound quality.
+# blocksize -- Mixer block size, larger blocks might help sound stuttering
+#              but sound will also be more lagged.
+# prebuffer -- How many milliseconds of data to keep on top of the blocksize.
+
+nosound=false
+rate=22050
+blocksize=1024
+prebuffer=1000
+
+[midi]
+# mpu401      -- Type of MPU-401 to emulate: none, uart or intelligent.
+# device      -- Device that will receive the MIDI data from MPU-401.
+#                This can be default,alsa,oss,win32,coreaudio,none.
+# config      -- Special configuration options for the device. In Windows put
+#                the id of the device you want to use. See README for details.
+
+mpu401=intelligent
+device=default
+config=
+
+[sblaster]
+# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
+# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
+# mixer -- Allow the soundblaster mixer to modify the DOSBox mixer.
+# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
+#            On auto the mode is determined by sblaster type.
+#            All OPL modes are 'Adlib', except for CMS.
+# oplrate -- Sample rate of OPL music emulation.
+
+sbtype=sbpro1
+sbbase=220
+irq=5
+dma=1
+
+[gus]
+# gus -- Enable the Gravis Ultrasound emulation.
+# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the 
+#            Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
+# gusrate -- Sample rate of Ultrasound emulation.
+# ultradir -- Path to Ultrasound directory.  In this directory
+#             there should be a MIDI directory that contains
+#             the patch files for GUS playback.  Patch sets used
+#             with Timidity should work fine.
+
+gus=true
+gusrate=22050
+gusbase=240
+irq1=5
+irq2=5
+dma1=3
+dma2=3
+ultradir=C:\ULTRASND
+
+[speaker]
+# pcspeaker -- Enable PC-Speaker emulation.
+# pcrate -- Sample rate of the PC-Speaker sound generation.
+# tandy -- Enable Tandy Sound System emulation (off,on,auto).
+#          For auto Tandysound emulation is present only if machine is set to tandy.
+# tandyrate -- Sample rate of the Tandy 3-Voice generation.
+# disney -- Enable Disney Sound Source emulation. Covox Voice Master and Speech Thing compatible.
+
+pcspeaker=true
+pcrate=22050
+tandy=auto
+tandyrate=22050
+disney=true
+
+[joystick]
+# joysticktype -- Type of joystick to emulate: auto (default), none,
+#                 2axis (supports two joysticks,
+#                 4axis (supports one joystick, first joystick used),
+#                 4axis_2 (supports one joystick, second joystick used),
+#                 fcs (Thrustmaster), ch (CH Flightstick).
+#                 none disables joystick emulation.
+#                 auto chooses emulation depending on real joystick(s).
+# timed -- enable timed intervals for axis. (false is old style behaviour).
+# autofire -- continuously fires as long as you keep the button pressed.
+# swap34 -- swap the 3rd and the 4th axis. can be useful for certain joysticks.
+# buttonwrap -- enable button wrapping at the number of emulated buttons.
+
+joysticktype=auto
+timed=true
+autofire=false
+swap34=false
+buttonwrap=true
+
+[serial]
+# serial1-4 -- set type of device connected to com port.
+#              Can be disabled, dummy, modem, nullmodem, directserial.
+#              Additional parameters must be in the same line in the form of
+#              parameter:value. Parameter for all types is irq.
+#              for directserial: realport (required), rxdelay (optional).
+#              for modem: listenport (optional).
+#              for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
+#                             transparent, port, inhsocket (all optional).
+#              Example: serial1=modem listenport:5000
+
+serial1=dummy
+serial2=dummy
+serial3=disabled
+serial4=disabled
+
+[dos]
+# xms -- Enable XMS support.
+# ems -- Enable EMS support.
+# umb -- Enable UMB support.
+# keyboardlayout -- Language code of the keyboard layout (or none).
+
+xms=true
+ems=true
+umb=true
+keyboardlayout=none
+
+[ipx]
+# ipx -- Enable ipx over UDP/IP emulation.
+
+ipx=false
+
+[autoexec]
+# Lines in this section will be run at startup.
+mount c ./
+c: